Call for Papers:Vol.9 Issue.1

Submission
Last date		 26-Feb-2023
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-9,Issue-1. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS
PaperId: :  9292
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 4 Issue 6 2018
DUI:    16.0415/IJARIIE-9292
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
PaulMakesh.ADr.M.G.R Educational and Research Institute University, Chennai, India
Arivalgan.SDr.M.G.R Educational and Research Institute University, Chennai

Abstract

Civil Engineering
Net section rupture, Effective area, connection Eccentricity, Connection length, Ultimate strength
A tension part is connected by bolts to other parts or gusset plates. The sectional area is reduced by the bolt holes. These holes cause stress concentration adjacent to bolt holes. The stresses at these locations can be a high average stress on the net area at the angle sections. Due to the inherent ductility of cold formed steel this is usually neglected due to stress. The maximum elastic stress ratio adjacent to the hole to the average net cross section stress is referred to as the stress concentration factor Tests. This research work deals with the details of an Experimental investigation and net section failure on cold-formed steel section subjected to tension. This analysis carries single angle sections and double angles sections of 1.5mm and 1.6mm under plain (without Lipped) and with Lipped conditions subjected to tension. Analyses were carried out for 24 specimens of single angle sections and 48 specimens of double angles were connected same side to gusset plate and connected to opposite side. Results were recorded as the net section efficiency of the specimens failed by net section rupture.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE PaulMakesh.A, and Arivalgan.S. "TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS" International Journal Of Advance Research And Innovative Ideas In Education Volume 4 Issue 6 2018 Page 196-202
MLA PaulMakesh.A, and Arivalgan.S. "TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS." International Journal Of Advance Research And Innovative Ideas In Education 4.6(2018) : 196-202.
APA PaulMakesh.A, & Arivalgan.S. (2018). TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS. International Journal Of Advance Research And Innovative Ideas In Education, 4(6), 196-202.
Chicago PaulMakesh.A, and Arivalgan.S. "TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS." International Journal Of Advance Research And Innovative Ideas In Education 4, no. 6 (2018) : 196-202.
Oxford PaulMakesh.A, and Arivalgan.S. 'TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS', International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 6, 2018, p. 196-202. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/TENSION_MEMBERS_OF_NET_SECTION_EFFICIENCY_ON_COLD_FORMED_STEEL__ANGLE_SECTIONS_ijariie9292.pdf (Accessed : 02 May 2022).
Harvard PaulMakesh.A, and Arivalgan.S. (2018) 'TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS', International Journal Of Advance Research And Innovative Ideas In Education, 4(6), pp. 196-202IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/TENSION_MEMBERS_OF_NET_SECTION_EFFICIENCY_ON_COLD_FORMED_STEEL__ANGLE_SECTIONS_ijariie9292.pdf (Accessed : 02 May 2022)
IEEE PaulMakesh.A, and Arivalgan.S, "TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS," International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 6, pp. 196-202, Nov-Dec 2018. [Online]. Available: http://ijariie.com/AdminUploadPdf/TENSION_MEMBERS_OF_NET_SECTION_EFFICIENCY_ON_COLD_FORMED_STEEL__ANGLE_SECTIONS_ijariie9292.pdf [Accessed : 02 May 2022].
Turabian PaulMakesh.A, and Arivalgan.S. "TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 4 number 6 (02 May 2022).
Vancouver PaulMakesh.A, and Arivalgan.S. TENSION MEMBERS OF NET SECTION EFFICIENCY ON COLD FORMED STEEL ANGLE SECTIONS. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2018 [Cited : 02 May 2022]; 4(6) : 196-202. Available from: http://ijariie.com/AdminUploadPdf/TENSION_MEMBERS_OF_NET_SECTION_EFFICIENCY_ON_COLD_FORMED_STEEL__ANGLE_SECTIONS_ijariie9292.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 5/2/2022 10:25:10 AM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
MECHANICAL PROPERTIES OF HIGH-PERFORMANCE MORTAR BLENDED WITH SILICA FUMECivil EngineeringS. Srividhya Download
A FEASIBILITY STUDY ON GRAPHENE WITH CEMENT CONCRETECIVIL ENGINEERINGKotipalli Udaya Shanthi Download
Investigation on Bridge Deck with different slab thickness and steel bar diameter to determine stress and deformationCivil EngineeringBinit Kumar Download
PRODUCTION AND VALORIZATION OF THE INDUSTRIAL MINING WASTE IN CIVIL ENGINEERINGCivil EngineeringRaja MOUSSAOUI Download
Perceptions of stakeholders about technical capacity and performance of local builders in residential building construction sites at Gaindakot Municipality, Nepal.Civil Engineering Sandesh Sigdel Download
BEAHVIOR OF HEAVY WEIGHT CONCRETE BEAMS REINFORCED WITH CGFRP BARSCivil Engineering Mahmoud El-Desouky Download
Pavement Design for the Conversion of 2 lane to 6 lane of Thuravoor Thekku to Paravoor Road (NHAI)Civil EngineeringSHALBIN SHAJI Download
Evaluation Of Structure Performance On Store Building With Spectrum Response Analysed Based On Etabs Software v.2013 Hotel Harris Batam CenterCivil EngineeringEdi Indera Download
Analysis and study of use of light reflective stickers on Speed breakers to avoid sudden accidents.Civil EngineeringGaurav sidar Download
IDEAL IMPLEMENTATION OF POLYETHYLENE TEREPHTHALATE RESIN IN FLEXIBLE PAVEMENTCivil EngineeringYash S. Dhurve Download
Optimization Of Compressive Strength Of Hybrid Polypropylene – Nylon Fibre Reinforced Concrete (HPNFRC)Civil Engineering K. C. Nwachukwu Download
EVALUATION OF COMPRESSIVE STRENGTH GEO-POLYMER FOAMED CONCRETEcivil engineeringASHUTOSH KHARE Download
REDESIGN OF G+2 STOREY CONCRETE STRUCTURE TO STEEL, USING ETABSCIVIL ENGINEERINGALEENA ELIZABETH JOSE Download
ANALYSIS TO DETERMINE THE FEASIBILITY OF AN SUBMERGED FLOATING TUNNEL WITH SUSPENSION CABLESCivil EngineeringGanesh Govindrao Kundleshwar Download
ANALYSIS AND DESIGN OF MULTI-STOREY BUILDING USING WITH L-SHAPED COLUMNCIVIL ENGINEERINGANJANA G R Download
12