FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE

November 2015
Vol-1, Issue-5
Paper ID: 1345
ISSN: 2395-4396
Downloads: 79
Download PDF

Abstract & Details

Research Area
Production Engineering
Keywords
Casting Solidification Heat Transfer Thermal Gradient Flux
Abstract
The complexity of process of solidification has urged the engineers to simulate the process before actually carrying out the casting procedure . Finite element method is used to simulate the heat transfer process accompanying the solidification process. The metal and the mould along with the air gap formation is accounted in the heat transfer simulation. Distortion of the casting is caused due to non-uniform shrinkage associated with the process. Residual stresses are induced in the final castings. In this thesis, transient heat transfer analysis of an L Shaped casting is presented. Contours of various parameters viz; thermal gradient, thermal flux and temperature distribution are obtained using ANSYS commercial finite element analysis code. The simulations are compared with available experimental data and the comparison is found to be good. Special considerations regarding the simulation of solidification process are also brought out.

Author Information

# Name Institute / Affiliation
1 Buddh Vilash Patel Vikrant Institute of Technology and Management
2 Dushyant Diwedi Vikrant Institute of Technology and Management

How to Cite

Use the following formats to cite this article in your research.

APA Style
Patel, Buddh Vilash & Diwedi, Dushyant (2015). FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE. International Journal of Advance Research and Innovative Ideas In Education, 1(5), 87-95.
MLA Style
Patel, Buddh Vilash, and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, 2015, pp. 87-95.
IEEE Style
Buddh Vilash Patel and Dushyant Diwedi, "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE," International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, pp. 87-95, 2015.
Vancouver Style
Patel Buddh Vilash, Diwedi Dushyant. FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE. International Journal of Advance Research and Innovative Ideas In Education. 2015;1(5):87-95.
Harvard Style
Patel, Buddh Vilash & Diwedi, Dushyant (2015) 'FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE', International Journal of Advance Research and Innovative Ideas In Education, 1(5), pp. 87-95.
Chicago Style
Patel, Buddh Vilash and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 87-95.
Turabian Style
Patel, Buddh Vilash and Dushyant Diwedi. "FINITE ELEMENT ANALYSIS OF SOLIDIFICATION OF L-SHAPED CASTING USING ANSYS PARAMETRIC DESIGN LANGUAGE." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 87-95.

Export Citation

Related Research