NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D

May 2024
Vol-10, Issue-3
Paper ID: 24151
ISSN: 2395-4396
Downloads: 67
Download PDF

Abstract & Details

Research Area
Civil Engineering
Keywords
Load reduction Tunnels Vertical earth pressure Crumb rubber
Abstract
Huge fill soil in high-fill cut-and-cover tunnels (HFCCT) generates high pressure above the tunnel, while rubber soil serves as an effective lightweight fill material to reduce weight. The main factor affecting the stability of the cut-and-cover (CCT) is reducing the load and settlement on the CCT. This paper employs finite element software, PLAXIS 3D, to conduct a numerical analysis of the HFCCT model, which includes a replacement part of sand soil and a rubber-sand mixture. Both data sets are simultaneously gathered in a direct shear test and a relative density test. Data are analyzed in the context of mixture theory and with the aid of numerical simulations. The Mohr Coulomb model uses rubber sand, and the Hardening Soil model uses sand. A numerical model is built to simulate such conditions for filling sand above (CCT) to the rubber-sand layer above the tunnel. And, using a concrete model to simulate the lining of CCT, the performance of rubber sand is measured, while the soil layer increases through the numerical results. The effect of rubber on vertical earth pressure (VEP) on CCT is compared with the varying thickness of the rubber-sand layer to obtain the best economic thickness. This study also considers the impact of settlement on CCT. The PLAXIS output shows the layer mechanism and the minimum earth pressure in VEP that will be reached when using rubber-sand. The utilization of rubber as a substitute for soil results in a uniform load reduction mechanism and increases the bearing capacity of sand.

Author Information

# Name Institute / Affiliation
1 Najia A. Mahfouz Higher Technological Institute Six of October city
2 Ahmed H. Ali Civil Engineering Department, Faculty of Engineering Mataria, Helwan University
3 Mahmoud Hussein Mohamed Construction Research Institute, National Water Research Centre
4 Hesham A. Haggag Civil Engineering Department, Faculty of Engineering Mataria, Helwan University

How to Cite

Use the following formats to cite this article in your research.

APA Style
Mahfouz, Najia A., Ali, Ahmed H., Mohamed, Mahmoud Hussein, & Haggag, Hesham A. (2024). NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D. International Journal of Advance Research and Innovative Ideas In Education, 10(3), 4243-4250.
MLA Style
Mahfouz, Najia A., et al. "NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D." International Journal of Advance Research and Innovative Ideas In Education, vol. 10, no. 3, 2024, pp. 4243-4250.
IEEE Style
Najia A. Mahfouz, Ahmed H. Ali, Mahmoud Hussein Mohamed, and Hesham A. Haggag, "NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D," International Journal of Advance Research and Innovative Ideas In Education, vol. 10, no. 3, pp. 4243-4250, 2024.
Vancouver Style
Mahfouz Najia A., Ali Ahmed H., Mohamed Mahmoud Hussein, Haggag Hesham A.. NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D. International Journal of Advance Research and Innovative Ideas In Education. 2024;10(3):4243-4250.
Harvard Style
Mahfouz, Najia A., Ali, Ahmed H., Mohamed, Mahmoud Hussein, & Haggag, Hesham A. (2024) 'NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D', International Journal of Advance Research and Innovative Ideas In Education, 10(3), pp. 4243-4250.
Chicago Style
Mahfouz, Najia A., et al. "NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D." International Journal of Advance Research and Innovative Ideas In Education 10, no. 3 (2024): 4243-4250.
Turabian Style
Mahfouz, Najia A., et al. "NUMERICAL ANALYSES OF HIGH-FILLED CUT-AND-COVER TUNNEL USING PLAXIS 3D." International Journal of Advance Research and Innovative Ideas In Education 10, no. 3 (2024): 4243-4250.

Export Citation

Related Research