EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS
Abstract & Details
Research Area
Engineering
Keywords
A-TIG
AISI 1010
AISI 304
ZrO₂
Al₂O₃
Dissimilar welding
Tensile strength
Microhardness.
Abstract
Joining AISI 1010 carbon steel with AISI 304 austenitic stainless steel offers a practical way to combine the low cost of carbon steel with the corrosion resistance of stainless steel. This work examines the mechanical and metallurgical characteristics of dissimilar joints produced by activated flux-assisted tungsten inert gas (A-TIG) welding. Conventional TIG welding was used as the reference, while ZrO₂, Al₂O₃, and a 50:50 wt.% ZrO₂–Al₂O₃ mixture served as activating fluxes. Square-butt joints were prepared from 5 mm thick plates with a 1 mm root gap. Welding was carried out at 120 A, 12–14 V, and a travel speed of 90–110 mm/min. A 2.4 mm tungsten electrode was used with DCEN polarity and pure argon shielding at 12–15 L/min. Before welding, a thin flux layer of approximately 0.15–0.25 mm was manually applied along the joint line. Tensile, Charpy impact, and Vickers microhardness tests were conducted according to ASTM E8/E8M, ASTM E23, and ASTM E384, respectively. Transverse macrosections and optical microscopy were used to assess penetration, bead geometry, fusion, grain morphology, heat-affected zones, and weld-metal features. Selected weld and fracture surfaces were further examined by scanning electron microscopy. The four welding conditions enabled a direct comparison of conventional TIG and the three A-TIG flux systems for AISI 1010/AISI 304 dissimilar joints.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | M. SRILASRI | PRIST Deemed to be University |
| 2 | P. SHANMUGHAM | PRIST Deemed to be University |
| 3 | P. VIJAYA KUMAR | PRIST Deemed to be University |
How to Cite
Use the following formats to cite this article in your research.
APA Style
SRILASRI, M., SHANMUGHAM, P., & KUMAR, P. VIJAYA (2026). EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS. International Journal of Advance Research and Innovative Ideas In Education, 12(5), 767-774.
MLA Style
SRILASRI, M., et al. "EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS." International Journal of Advance Research and Innovative Ideas In Education, vol. 12, no. 5, 2026, pp. 767-774.
IEEE Style
M. SRILASRI, P. SHANMUGHAM, and P. VIJAYA KUMAR, "EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS," International Journal of Advance Research and Innovative Ideas In Education, vol. 12, no. 5, pp. 767-774, 2026.
Vancouver Style
SRILASRI M., SHANMUGHAM P., KUMAR P. VIJAYA. EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS. International Journal of Advance Research and Innovative Ideas In Education. 2026;12(5):767-774.
Harvard Style
SRILASRI, M., SHANMUGHAM, P., & KUMAR, P. VIJAYA (2026) 'EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS', International Journal of Advance Research and Innovative Ideas In Education, 12(5), pp. 767-774.
Chicago Style
SRILASRI, M., P. SHANMUGHAM, and P. VIJAYA KUMAR. "EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS." International Journal of Advance Research and Innovative Ideas In Education 12, no. 5 (2026): 767-774.
Turabian Style
SRILASRI, M., P. SHANMUGHAM, and P. VIJAYA KUMAR. "EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS." International Journal of Advance Research and Innovative Ideas In Education 12, no. 5 (2026): 767-774.
Related Research
CONCEPTUALIZATION DEVELOPMENT OF A SMART STAIR-CLIMBING TROLLEY FOR MULTI-STOREY BUILDINGS USING DC POWER SYSTEM
Download PDF
Experimental And Numerical Investigation On Improving Cooling Performance Of Heat Sink.
Download PDF
CFD SIMULATION ANALYSIS OF VEHICLES USING VORTEX GENERATORS WITH SOLID WORKS FLOW SIMULATION
Download PDF