Call for Papers:Vol.11 Issue.3

Submission
Last date		 28-Jun-2025
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-11,Issue-3. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS
PaperId: :  8931
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 4 Issue 4 2018
DUI:    16.0415/IJARIIE-8931
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
S. B.NavaleAVCOE, Sangamner
Dr. B. R. BorkarAVCOE, Sangamner

Abstract

Production Engineering
FSW1, Taguchi method2, Tensile strength3, ANOVA4, Minitab 165.
In this experimental work the effect of three controllable factors mainly Rotational speed (1000, 1500, 2000), Welding Speed (30, 50, 70) & Shoulder to pin diameter (D/d) ratio (4.5, 5.0, 5.5) on Tensile strength in FSW operation were investigated. The experiments were performed on dissimilar material Al-Cu plates Using Taguchi method. A three level, three Factor design of experiment prepared according to Taguchi orthogonal array L9 using Minitab 16 software. The Analysis of Variance (ANOVA) and Signal to Noise (S/N) Ratio was carried to find out the most significant factor and percentage contribution of individual factor for Tensile strength. From result it is found that optimum level for Tensile strength is obtained as 2000 rpm of rotational speed, 70 mm/rev of welding speed and 5.5 of Shoulder to pin diameter. From result it is also observed that rotational speed is the most contributing factor with contribution of 70.44%. Finally a model for tensile strength values based on FSW parameters was calculated which was also confirmed by experimental results. Shoulder to pin diameter (D/d) ratio has the second highest influence on Tensile strength of Friction stir welded Al-Cu dissimilar materials.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE S. B.Navale, and Dr. B. R. Borkar. "EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS" International Journal Of Advance Research And Innovative Ideas In Education Volume 4 Issue 4 2018 Page 618-626
MLA S. B.Navale, and Dr. B. R. Borkar. "EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS." International Journal Of Advance Research And Innovative Ideas In Education 4.4(2018) : 618-626.
APA S. B.Navale, & Dr. B. R. Borkar. (2018). EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS. International Journal Of Advance Research And Innovative Ideas In Education, 4(4), 618-626.
Chicago S. B.Navale, and Dr. B. R. Borkar. "EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS." International Journal Of Advance Research And Innovative Ideas In Education 4, no. 4 (2018) : 618-626.
Oxford S. B.Navale, and Dr. B. R. Borkar. 'EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS', International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 4, 2018, p. 618-626. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/EFFECT_OF_SHOULDER_TO_PIN_DIAMETER__D_d__RATIO_ON_TENSILE_STRENGTH_OF_FRICTION_STIR_WELDED_DISSIMILAR_MATERIALS_ijariie8931.pdf (Accessed : 20 July 2018).
Harvard S. B.Navale, and Dr. B. R. Borkar. (2018) 'EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS', International Journal Of Advance Research And Innovative Ideas In Education, 4(4), pp. 618-626IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/EFFECT_OF_SHOULDER_TO_PIN_DIAMETER__D_d__RATIO_ON_TENSILE_STRENGTH_OF_FRICTION_STIR_WELDED_DISSIMILAR_MATERIALS_ijariie8931.pdf (Accessed : 20 July 2018)
IEEE S. B.Navale, and Dr. B. R. Borkar, "EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS," International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 4, pp. 618-626, Jul-Aug 2018. [Online]. Available: http://ijariie.com/AdminUploadPdf/EFFECT_OF_SHOULDER_TO_PIN_DIAMETER__D_d__RATIO_ON_TENSILE_STRENGTH_OF_FRICTION_STIR_WELDED_DISSIMILAR_MATERIALS_ijariie8931.pdf [Accessed : 20 July 2018].
Turabian S. B.Navale, and Dr. B. R. Borkar. "EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 4 number 4 (20 July 2018).
Vancouver S. B.Navale, and Dr. B. R. Borkar. EFFECT OF SHOULDER TO PIN DIAMETER (D/d) RATIO ON TENSILE STRENGTH OF FRICTION STIR WELDED DISSIMILAR MATERIALS. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2018 [Cited : 20 July 2018]; 4(4) : 618-626. Available from: http://ijariie.com/AdminUploadPdf/EFFECT_OF_SHOULDER_TO_PIN_DIAMETER__D_d__RATIO_ON_TENSILE_STRENGTH_OF_FRICTION_STIR_WELDED_DISSIMILAR_MATERIALS_ijariie8931.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 7/20/2018 8:27:26 AM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approachmechanical engineeringTilesh Kumar Sidar Download
SUPPLIER RELATIONSHIP MANAGEMENT AND THE PERFORMANCE OF MICRO, SMALL AND MEDIUM ENTERPRISES IN NAIROBI CITY COUNTY, KENYAProcurement and LogisticsKemunto Download
Formulation and Development of Nimesulide Micro-Encapsulation by Fluidized Bed Processorpharamacy,science technology.Batham Arpit Manojkumar Download
EFFECT OF DEEP DRAW RADIUS IN DEEP DRAWING PROCESS WITH DIFFERENT PUNCHING LOADS IN FORMABILITY OF ALUMINIUM 6061Production EngineeringPrince Arora Download
DIFFERENT APPROACHES FOR SOLUBILITY ENHANCEMENT TECHNIQUES OF TABLETPharmaceuticalsVikash kumar Download
Influence of Copper addition on Mechanical Behavior of Al-Ca AlloyPRODUCTION ENGINEERINGRitesh Kumar Download
INFLUENCE OF LOGISTICS RISK MANAGEMENT PRACTICES ON FIRM PERFORMANCE A CASE STUDY OF THE NEW KCC KENYAProcurement and LogisticsBonface Kibet Koskei Download
THE EFFECT OF FREIGHT FOWARDING ON PERFORMANCE OF DRY PORTS IN KENYA, A CASE OF INLAND CONTAINER DEPOT, NAIROBIProcurement and LogisticsBonface Kibet Koskei Download
EXPERIMENTAL ANALYSIS OF TEMPERING TEMPERATURE AND TIME ON MECHANICAL PROPERTIES OF AISI 1040 STEELPRODUCTION ENGINEERINGNilesh Kumar Mandal Download
Effect of Spot Welding in Steel: A Generalized ReviewThermal EngineeringSunil Download
Experimental Analysis of Fatigue Life for Spot Welded Joints With Different ArrangementMechanical EngineeringProf. Sutar M.A. Download
INFLUENCE OF LOGISTICS MANAGEMENT PRACTICES ON PERFORMANCE OF FOOD AND BEVERAGE MANUFACTURING FIRMS IN NAIROBI CITY COUNTY, KENYALogisticsVeronicah Wangui Chege Download
PRODUCTIVITY ENHANCEMENT IN GARMENT INDUSTRY USING INDUSTRIAL ENGINEERING PRINCIPLESIndustrial and Production EngineeringV R Muruganantham Download
INFLUENCE OF LOGISTICS OPTIMIZATION ON PERFORMANCE OF AGRICULTURAL FIRMS IN MURANG’A COUNTY, KENYALogisticsMaxwell Maobe Mogoi Download
INFLUENCE OF SUPPLY CHAIN RESILIENCE STRATEGIES ON PERFORMANCE OF RETAIL STORES IN KENYAProcurement and LogisticsAbigael Chepkwemoi Ndiema Download
12