Call for Papers:Vol.8 Issue.4

Submission
Last date		 31-Aug-2022
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-8,Issue-4. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM
PaperId: :  8937
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 4 Issue 4 2018
DUI:    16.0415/IJARIIE-8937
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
T. S. PawarAVCOE, Sangamner
Dr. B. R. BorkarAVCOE, Sangamner
Prof. V. B. ShindeAVCOE, Sangamner

Abstract

Production Engineering
CNC Turning1, Taguchi method2, Surface roughness3, ANOVA4, Minitab 165
This paper deals with the effect of controllable factors mainly spindle speed (800, 900, 1000), feed rate (80, 100, 120), depth of Cut (0.5, 0.8, 1.0) on Surface Roughness in CNC turning operation. The experiments were performed on 2024-T3 Aluminium material using Taguchi method. A three level, three Factor design of experiment prepared according to Taguchi orthogonal array L9 using Minitab 16 software. The Analysis of Variance (ANOVA) and Signal to Noise (S/N) Ratio was carried to find out the most significant factor and percentage contribution of individual factor for Surface Roughness. The all experiments were performed at dry condition. From result it is found that optimum level for Surface Roughness is obtained as 800 m/min of Spindle speed, 80 mm/min of feed and 0.8mm of depth of cut.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. "OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM" International Journal Of Advance Research And Innovative Ideas In Education Volume 4 Issue 4 2018 Page 658-664
MLA T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. "OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM." International Journal Of Advance Research And Innovative Ideas In Education 4.4(2018) : 658-664.
APA T. S. Pawar, Dr. B. R. Borkar, & Prof. V. B. Shinde. (2018). OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM. International Journal Of Advance Research And Innovative Ideas In Education, 4(4), 658-664.
Chicago T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. "OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM." International Journal Of Advance Research And Innovative Ideas In Education 4, no. 4 (2018) : 658-664.
Oxford T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. 'OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM', International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 4, 2018, p. 658-664. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/OPTIMIZATION_OF_TURNING_PARAMETERS_TO_IMPROVE_SURFACE_ROUGHNESS_OF_2024_T3_ALUMINIUM_ijariie8937.pdf (Accessed : 05 January 2021).
Harvard T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. (2018) 'OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM', International Journal Of Advance Research And Innovative Ideas In Education, 4(4), pp. 658-664IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/OPTIMIZATION_OF_TURNING_PARAMETERS_TO_IMPROVE_SURFACE_ROUGHNESS_OF_2024_T3_ALUMINIUM_ijariie8937.pdf (Accessed : 05 January 2021)
IEEE T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde, "OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM," International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 4, pp. 658-664, Jul-Aug 2018. [Online]. Available: http://ijariie.com/AdminUploadPdf/OPTIMIZATION_OF_TURNING_PARAMETERS_TO_IMPROVE_SURFACE_ROUGHNESS_OF_2024_T3_ALUMINIUM_ijariie8937.pdf [Accessed : 05 January 2021].
Turabian T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. "OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 4 number 4 (05 January 2021).
Vancouver T. S. Pawar, Dr. B. R. Borkar, and Prof. V. B. Shinde. OPTIMIZATION OF TURNING PARAMETERS TO IMPROVE SURFACE ROUGHNESS OF 2024-T3 ALUMINIUM. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2018 [Cited : 05 January 2021]; 4(4) : 658-664. Available from: http://ijariie.com/AdminUploadPdf/OPTIMIZATION_OF_TURNING_PARAMETERS_TO_IMPROVE_SURFACE_ROUGHNESS_OF_2024_T3_ALUMINIUM_ijariie8937.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 1/5/2021 11:13:19 PM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
INFLUENCE OF LOGISTICS MANAGEMENT PRACTICES ON PERFORMANCE OF FOOD AND BEVERAGE MANUFACTURING FIRMS IN NAIROBI CITY COUNTY, KENYALogisticsVeronicah Wangui Chege Download
PRODUCTIVITY ENHANCEMENT IN GARMENT INDUSTRY USING INDUSTRIAL ENGINEERING PRINCIPLESIndustrial and Production EngineeringV R Muruganantham Download
INFLUENCE OF LOGISTICS OPTIMIZATION ON PERFORMANCE OF AGRICULTURAL FIRMS IN MURANG’A COUNTY, KENYALogisticsMaxwell Maobe Mogoi Download
INFLUENCE OF SUPPLY CHAIN RESILIENCE STRATEGIES ON PERFORMANCE OF RETAIL STORES IN KENYAProcurement and LogisticsAbigael Chepkwemoi Ndiema Download
Collaborative Manufacturing Platform For Industry 4.0Prodution EngineeringVaibhav Download
Design And Fabricate Crop Cutter MachineMechanical EngineeringAkshay Madhukar Sonkusare Download
MODELING AND OPTIMIZATION OF MAGNETO-RHEOLOGICAL ABRASIVE FLOW FINISHING (MRAFF) PROCESS USING CFDProduction EngineeringSHISHIR MAYANK Download
3D Printing: A Revolutionary Transformation in ManufacturingMechanical EngineeringSunil Kumar Download
DESIGN AND OPTIMIZATION OF DOWNDRAFT GASIFIER FOR OPERATING CI ENGINE ON DUAL FUEL MODEProduction EngineeringALOK KUMAR Download
Investigation of Performance of Application of vortex tube for tool tip cooling and Minimum quantity Lubrication in turning of EN24 materialProduction EngineeringDr G K Jadhav Download
COMPARATIVE STUDY OF MPPT ALGORITHMS FOR PHOTOVOLTAIC SYSTEMRenewable energyChrysostome ANDRIANANTENAINA Download
Experimental review on EN 47 Leaf Spring & E-Glass Fiber with Epoxy Resin Hardner Based unidirection laminated Composite Leaf SpringProduction EngineeringN. J. Varpe Download
EXPERIMENTAL EFFECT OF VARIOUS MACHINING PARAMETERS ON OVALITY OF CYLINDRICAL SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
OPTIMIZATION OF OVALITY OF KTM BIKE SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHODProduction EngineeringNamita Godge Download
12