Call for Papers:Vol.8 Issue.1

Submission
Last date		 27-Feb-2022
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-8,Issue-1. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  “Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”
PaperId: :  2965
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 2 Issue 4 2016
DUI:    16.0415/IJARIIE-2965
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
Amit TiwariPacific University Udaipur Rajasthan India
Manish PokharnaPacific Unversity Udaipur Rajasthan India

Abstract

Production Engineering
CNC; Taguchi; Surface roughness; ANOVA; Regression.
Prediction of surface roughness and dimensional inaccuracies is an essential prerequisite for any unmanned computer numeric controlled (CNC) machinery. This prediction technique is also important for optimization of machining process. In the present work, it is observed that, using Taguchi approach, the quality of surface finish can be predicted within a reasonable degree of accuracy. Surface roughness is the critical factor which influences the quality of the machined parts. In this research work, an attempt has been made to optimize the cutting conditions to get predicted surface roughness in end milling of mild steel work piece. The experiment was designed using Taguchi method and 16 experimental runs were conducted for various combinations of cutting parameters according to L16’ orthogonal array technique. The orthogonal array, signal to noise ratio and analysis of variance (ANOVA) were employed to study the performance characteristics at different conditions. In order to analyze the response of the system, experiments were carried out at various spindle speeds, depth of cut and feed rate. The results obtained by this research will be useful for various industries and researchers working in this field. Feed rate is observed to be main parameters affecting surface roughness. Regression equation is formulated for estimating predicted values of surface roughness. Finally, to illustrate the effectiveness of the regression equation, the rate of error is found between the actual and predicted surface roughness values.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE Amit Tiwari, and Manish Pokharna. "“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”" International Journal Of Advance Research And Innovative Ideas In Education Volume 2 Issue 4 2016 Page 856-873
MLA Amit Tiwari, and Manish Pokharna. "“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”." International Journal Of Advance Research And Innovative Ideas In Education 2.4(2016) : 856-873.
APA Amit Tiwari, & Manish Pokharna. (2016). “Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”. International Journal Of Advance Research And Innovative Ideas In Education, 2(4), 856-873.
Chicago Amit Tiwari, and Manish Pokharna. "“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”." International Journal Of Advance Research And Innovative Ideas In Education 2, no. 4 (2016) : 856-873.
Oxford Amit Tiwari, and Manish Pokharna. '“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”', International Journal Of Advance Research And Innovative Ideas In Education, vol. 2, no. 4, 2016, p. 856-873. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/“Investigation_of_Effect_of_Machining__Parameters_in_CNC_Milling_For_Surface__Quality_and_Its_Optimization”_ijariie2965.pdf (Accessed : 26 July 2017).
Harvard Amit Tiwari, and Manish Pokharna. (2016) '“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”', International Journal Of Advance Research And Innovative Ideas In Education, 2(4), pp. 856-873IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/“Investigation_of_Effect_of_Machining__Parameters_in_CNC_Milling_For_Surface__Quality_and_Its_Optimization”_ijariie2965.pdf (Accessed : 26 July 2017)
IEEE Amit Tiwari, and Manish Pokharna, "“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”," International Journal Of Advance Research And Innovative Ideas In Education, vol. 2, no. 4, pp. 856-873, Jul-Aug 2016. [Online]. Available: http://ijariie.com/AdminUploadPdf/“Investigation_of_Effect_of_Machining__Parameters_in_CNC_Milling_For_Surface__Quality_and_Its_Optimization”_ijariie2965.pdf [Accessed : 26 July 2017].
Turabian Amit Tiwari, and Manish Pokharna. "“Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 2 number 4 (26 July 2017).
Vancouver Amit Tiwari, and Manish Pokharna. “Investigation of Effect of Machining Parameters in CNC Milling For Surface Quality and Its Optimization”. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2016 [Cited : 26 July 2017]; 2(4) : 856-873. Available from: http://ijariie.com/AdminUploadPdf/“Investigation_of_Effect_of_Machining__Parameters_in_CNC_Milling_For_Surface__Quality_and_Its_Optimization”_ijariie2965.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 7/26/2017 4:14:28 AM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
PRODUCTIVITY ENHANCEMENT IN GARMENT INDUSTRY USING INDUSTRIAL ENGINEERING PRINCIPLESIndustrial and Production EngineeringV R Muruganantham Download
INFLUENCE OF LOGISTICS OPTIMIZATION ON PERFORMANCE OF AGRICULTURAL FIRMS IN MURANG’A COUNTY, KENYALogisticsMaxwell Maobe Mogoi Download
INFLUENCE OF SUPPLY CHAIN RESILIENCE STRATEGIES ON PERFORMANCE OF RETAIL STORES IN KENYAProcurement and LogisticsAbigael Chepkwemoi Ndiema Download
Collaborative Manufacturing Platform For Industry 4.0Prodution EngineeringVaibhav Download
Design And Fabricate Crop Cutter MachineMechanical EngineeringAkshay Madhukar Sonkusare Download
MODELING AND OPTIMIZATION OF MAGNETO-RHEOLOGICAL ABRASIVE FLOW FINISHING (MRAFF) PROCESS USING CFDProduction EngineeringSHISHIR MAYANK Download
3D Printing: A Revolutionary Transformation in ManufacturingMechanical EngineeringSunil Kumar Download
DESIGN AND OPTIMIZATION OF DOWNDRAFT GASIFIER FOR OPERATING CI ENGINE ON DUAL FUEL MODEProduction EngineeringALOK KUMAR Download
Investigation of Performance of Application of vortex tube for tool tip cooling and Minimum quantity Lubrication in turning of EN24 materialProduction EngineeringDr G K Jadhav Download
COMPARATIVE STUDY OF MPPT ALGORITHMS FOR PHOTOVOLTAIC SYSTEMRenewable energyChrysostome ANDRIANANTENAINA Download
Experimental review on EN 47 Leaf Spring & E-Glass Fiber with Epoxy Resin Hardner Based unidirection laminated Composite Leaf SpringProduction EngineeringN. J. Varpe Download
EXPERIMENTAL EFFECT OF VARIOUS MACHINING PARAMETERS ON OVALITY OF CYLINDRICAL SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
OPTIMIZATION OF OVALITY OF KTM BIKE SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHODProduction EngineeringNamita Godge Download
PROCESS PARAMETER OPTIMIZATION IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI METHODProduction EngineeringNamita Godge Download
12