Call for Papers:Vol.11 Issue.3

Submission
Last date		 28-Jun-2025
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-11,Issue-3. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach
PaperId: :  25803
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 11 Issue 1 2025
DUI:    16.0415/IJARIIE-25803
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
Tilesh Kumar SidarDr. C.V. Raman Institute of Science & Technology, Kota Bilaspur, Chhattisgarh
Sandeep Kumar Sharma1 Dr. C.V. Raman Institute of Science & Technology, Kota Bilaspur, Chhattisgarh

Abstract

mechanical engineering
Aluminum alloy AA6101-T6, surface finish, Drilling operation, Minitab 17 software, Grey relational methodology, and analysis of variance (ANOVA).
One of the major obstacles in the drilling process is choosing the right drilling settings. These days, quality and productivity can be maintained and increased through the use of optimization techniques. Aluminum alloys are used in about half of the world's industrial and commercial processes. Due of their great excellent ductility, strength, and limited heat conductivity, materials like austenitic stainless steel are difficult to manufacture. The experimental investigation of the performance features of the AA6101 T6 aluminum alloy while drilling will be covered in this paper. Performance metrics like ovality and surface roughness during the drilling process are influenced by variables including drill bit diameter, spindle speed, and feed rate. The ideal level of variables must be chosen carefully to accomplish the lowest possible ovality and surface roughness. This paper presents the optimization of multi-objective parameters in aluminum alloy drilling to achieve minimal ovality and surface roughness using Grey Relational Analysis. The experiments will be performed in accordance with the experiment design. Minitab17 is a statistical program used to collect and analyze the experiment findings.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . "Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach" International Journal Of Advance Research And Innovative Ideas In Education Volume 11 Issue 1 2025 Page 1528-1536
MLA Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . "Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach." International Journal Of Advance Research And Innovative Ideas In Education 11.1(2025) : 1528-1536.
APA Tilesh Kumar Sidar, & Sandeep Kumar Sharma1 . (2025). Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach. International Journal Of Advance Research And Innovative Ideas In Education, 11(1), 1528-1536.
Chicago Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . "Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach." International Journal Of Advance Research And Innovative Ideas In Education 11, no. 1 (2025) : 1528-1536.
Oxford Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . 'Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach', International Journal Of Advance Research And Innovative Ideas In Education, vol. 11, no. 1, 2025, p. 1528-1536. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/Optimization_of_Drilling_Parameters_for_Aluminium_Alloy_to_Minimize_Ovality_and_Surface_Roughness_Using_a_Multi_Objective_Approach_ijariie25803.pdf (Accessed : 28 April 2025).
Harvard Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . (2025) 'Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach', International Journal Of Advance Research And Innovative Ideas In Education, 11(1), pp. 1528-1536IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/Optimization_of_Drilling_Parameters_for_Aluminium_Alloy_to_Minimize_Ovality_and_Surface_Roughness_Using_a_Multi_Objective_Approach_ijariie25803.pdf (Accessed : 28 April 2025)
IEEE Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 , "Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach," International Journal Of Advance Research And Innovative Ideas In Education, vol. 11, no. 1, pp. 1528-1536, Jan-Feb 2025. [Online]. Available: http://ijariie.com/AdminUploadPdf/Optimization_of_Drilling_Parameters_for_Aluminium_Alloy_to_Minimize_Ovality_and_Surface_Roughness_Using_a_Multi_Objective_Approach_ijariie25803.pdf [Accessed : 28 April 2025].
Turabian Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . "Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 11 number 1 (28 April 2025).
Vancouver Tilesh Kumar Sidar, and Sandeep Kumar Sharma1 . Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approach. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2025 [Cited : 28 April 2025]; 11(1) : 1528-1536. Available from: http://ijariie.com/AdminUploadPdf/Optimization_of_Drilling_Parameters_for_Aluminium_Alloy_to_Minimize_Ovality_and_Surface_Roughness_Using_a_Multi_Objective_Approach_ijariie25803.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 4/28/2025 5:21:54 PM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
Optimization of Drilling Parameters for Aluminium Alloy to Minimize Ovality and Surface Roughness Using a Multi-Objective Approachmechanical engineeringTilesh Kumar Sidar Download
SUPPLIER RELATIONSHIP MANAGEMENT AND THE PERFORMANCE OF MICRO, SMALL AND MEDIUM ENTERPRISES IN NAIROBI CITY COUNTY, KENYAProcurement and LogisticsKemunto Download
Formulation and Development of Nimesulide Micro-Encapsulation by Fluidized Bed Processorpharamacy,science technology.Batham Arpit Manojkumar Download
EFFECT OF DEEP DRAW RADIUS IN DEEP DRAWING PROCESS WITH DIFFERENT PUNCHING LOADS IN FORMABILITY OF ALUMINIUM 6061Production EngineeringPrince Arora Download
DIFFERENT APPROACHES FOR SOLUBILITY ENHANCEMENT TECHNIQUES OF TABLETPharmaceuticalsVikash kumar Download
Influence of Copper addition on Mechanical Behavior of Al-Ca AlloyPRODUCTION ENGINEERINGRitesh Kumar Download
INFLUENCE OF LOGISTICS RISK MANAGEMENT PRACTICES ON FIRM PERFORMANCE A CASE STUDY OF THE NEW KCC KENYAProcurement and LogisticsBonface Kibet Koskei Download
THE EFFECT OF FREIGHT FOWARDING ON PERFORMANCE OF DRY PORTS IN KENYA, A CASE OF INLAND CONTAINER DEPOT, NAIROBIProcurement and LogisticsBonface Kibet Koskei Download
EXPERIMENTAL ANALYSIS OF TEMPERING TEMPERATURE AND TIME ON MECHANICAL PROPERTIES OF AISI 1040 STEELPRODUCTION ENGINEERINGNilesh Kumar Mandal Download
Effect of Spot Welding in Steel: A Generalized ReviewThermal EngineeringSunil Download
Experimental Analysis of Fatigue Life for Spot Welded Joints With Different ArrangementMechanical EngineeringProf. Sutar M.A. Download
INFLUENCE OF LOGISTICS MANAGEMENT PRACTICES ON PERFORMANCE OF FOOD AND BEVERAGE MANUFACTURING FIRMS IN NAIROBI CITY COUNTY, KENYALogisticsVeronicah Wangui Chege Download
PRODUCTIVITY ENHANCEMENT IN GARMENT INDUSTRY USING INDUSTRIAL ENGINEERING PRINCIPLESIndustrial and Production EngineeringV R Muruganantham Download
INFLUENCE OF LOGISTICS OPTIMIZATION ON PERFORMANCE OF AGRICULTURAL FIRMS IN MURANG’A COUNTY, KENYALogisticsMaxwell Maobe Mogoi Download
INFLUENCE OF SUPPLY CHAIN RESILIENCE STRATEGIES ON PERFORMANCE OF RETAIL STORES IN KENYAProcurement and LogisticsAbigael Chepkwemoi Ndiema Download
12