Call for Papers:Vol.8 Issue.4

Submission
Last date		 31-Aug-2022
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-8,Issue-4. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel
PaperId: :  2035
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 2 Issue 2 2016
DUI:    16.0415/IJARIIE-2035
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
Devesh Kumar SinghBhagwant University,Ajmer
Manish Kumar SinghBhagwant University,Ajmer
Dharmendra DubeyBhagwant University,Ajmer

Abstract

Production Engineering
Minimum quantity lubrication, molybdenum disulfide, conventional water soluble cutting oil, paraffin oil, machining, AISI 316Ti stainless steel.
Machining is one of the most critical processes in the manufacturing industries which involve a controlled removal of material from the substrate by using a cutting tool. While these materials solve a great deal of technological issue, they also pose considerable challenge in machining due to poor machinability characteristics. However, environmental friendly machining techniques have been given major emphasis and minimum quantity lubrication (MQL) technique is one of them. During the current research work, the effect of addition of MoS2 powder, with average size of around 1.5 µm, in two different base fluids namely conventional water soluble oil and paraffin oil (a mineral oil) has been investigated during turning of AISI 316Ti grade austenitic stainless steel. Although molybdenum disulfide (MoS2) is widely regarded as solid lubricant material, its potential as an effective medium in MQL particularly in turning operation is yet to be explored. The results clearly indicated the beneficial aspects of MoS2 in reducing the cutting temperature by virtue of enhanced heat transfer characteristics of micro-particle of MoS2.The same powder also helped in bringing down cutting force and chip thickness while improving surface finish. It was observed that MoS2- mixed conventional cutting fluid demonstrated superior machining characteristics. The study, therefore, clearly established promising potential of MoS2 powder to be mixed with suitable base fluid under MQL environment during machining AISI 316Ti grade austenitic stainless steel.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. "Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel" International Journal Of Advance Research And Innovative Ideas In Education Volume 2 Issue 2 2016 Page 1814-1819
MLA Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. "Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel." International Journal Of Advance Research And Innovative Ideas In Education 2.2(2016) : 1814-1819.
APA Devesh Kumar Singh, Manish Kumar Singh, & Dharmendra Dubey. (2016). Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel. International Journal Of Advance Research And Innovative Ideas In Education, 2(2), 1814-1819.
Chicago Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. "Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel." International Journal Of Advance Research And Innovative Ideas In Education 2, no. 2 (2016) : 1814-1819.
Oxford Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. 'Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel', International Journal Of Advance Research And Innovative Ideas In Education, vol. 2, no. 2, 2016, p. 1814-1819. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/Performance_of_Mos2_based_cutting_fluid__Lubricants_during_Maching_of_AISI_316Ti__Austenitic_Stainless_Steel_ijariie2035.pdf (Accessed : 15 February 2018).
Harvard Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. (2016) 'Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel', International Journal Of Advance Research And Innovative Ideas In Education, 2(2), pp. 1814-1819IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/Performance_of_Mos2_based_cutting_fluid__Lubricants_during_Maching_of_AISI_316Ti__Austenitic_Stainless_Steel_ijariie2035.pdf (Accessed : 15 February 2018)
IEEE Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey, "Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel," International Journal Of Advance Research And Innovative Ideas In Education, vol. 2, no. 2, pp. 1814-1819, Mar-App 2016. [Online]. Available: http://ijariie.com/AdminUploadPdf/Performance_of_Mos2_based_cutting_fluid__Lubricants_during_Maching_of_AISI_316Ti__Austenitic_Stainless_Steel_ijariie2035.pdf [Accessed : 15 February 2018].
Turabian Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. "Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 2 number 2 (15 February 2018).
Vancouver Devesh Kumar Singh, Manish Kumar Singh, and Dharmendra Dubey. Performance of Mos2 based cutting fluid Lubricants during Maching of AISI 316Ti Austenitic Stainless Steel. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2016 [Cited : 15 February 2018]; 2(2) : 1814-1819. Available from: http://ijariie.com/AdminUploadPdf/Performance_of_Mos2_based_cutting_fluid__Lubricants_during_Maching_of_AISI_316Ti__Austenitic_Stainless_Steel_ijariie2035.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads


Last download on 2/15/2018 4:48:11 AM

Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
INFLUENCE OF LOGISTICS MANAGEMENT PRACTICES ON PERFORMANCE OF FOOD AND BEVERAGE MANUFACTURING FIRMS IN NAIROBI CITY COUNTY, KENYALogisticsVeronicah Wangui Chege Download
PRODUCTIVITY ENHANCEMENT IN GARMENT INDUSTRY USING INDUSTRIAL ENGINEERING PRINCIPLESIndustrial and Production EngineeringV R Muruganantham Download
INFLUENCE OF LOGISTICS OPTIMIZATION ON PERFORMANCE OF AGRICULTURAL FIRMS IN MURANG’A COUNTY, KENYALogisticsMaxwell Maobe Mogoi Download
INFLUENCE OF SUPPLY CHAIN RESILIENCE STRATEGIES ON PERFORMANCE OF RETAIL STORES IN KENYAProcurement and LogisticsAbigael Chepkwemoi Ndiema Download
Collaborative Manufacturing Platform For Industry 4.0Prodution EngineeringVaibhav Download
Design And Fabricate Crop Cutter MachineMechanical EngineeringAkshay Madhukar Sonkusare Download
MODELING AND OPTIMIZATION OF MAGNETO-RHEOLOGICAL ABRASIVE FLOW FINISHING (MRAFF) PROCESS USING CFDProduction EngineeringSHISHIR MAYANK Download
3D Printing: A Revolutionary Transformation in ManufacturingMechanical EngineeringSunil Kumar Download
DESIGN AND OPTIMIZATION OF DOWNDRAFT GASIFIER FOR OPERATING CI ENGINE ON DUAL FUEL MODEProduction EngineeringALOK KUMAR Download
Investigation of Performance of Application of vortex tube for tool tip cooling and Minimum quantity Lubrication in turning of EN24 materialProduction EngineeringDr G K Jadhav Download
COMPARATIVE STUDY OF MPPT ALGORITHMS FOR PHOTOVOLTAIC SYSTEMRenewable energyChrysostome ANDRIANANTENAINA Download
Experimental review on EN 47 Leaf Spring & E-Glass Fiber with Epoxy Resin Hardner Based unidirection laminated Composite Leaf SpringProduction EngineeringN. J. Varpe Download
EXPERIMENTAL EFFECT OF VARIOUS MACHINING PARAMETERS ON OVALITY OF CYLINDRICAL SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
OPTIMIZATION OF OVALITY OF KTM BIKE SMC PARTProduction Engineering (cad/cam)Shendage D. E. Download
EFFECT OF ENTRY MATERIAL ON SURFACE ROUGHNESS IN DRILLING PROCESS OF PRINTED CIRCUIT BOARD USING TAGUCHI DESIGN METHODProduction EngineeringNamita Godge Download
12