Call for Papers:Vol.9 Issue.1

Submission
Last date		 26-Feb-2023
Acceptance Status In One Day
Paper Publish In Two Days
Submit ManuScript

News & Updates

Submit Article

Dear Authors, Article publish in our journal for Volume-9,Issue-1. For article submission on below link: Submit Manuscript


Join As Board

Dear Reviewer, You can join our Reviewer team without given any charges in our journal. Submit Details on below link: Join As Board


Paper Publication Charges

IJARIIE APP
Download Android App

For Authors

Archives

IJARIIE Board

Downloads

Android App

Download IJARIIE APP

Authors

Title: :  PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM
PaperId: :  7718
Published in:   International Journal Of Advance Research And Innovative Ideas In Education
Publisher:   IJARIIE
e-ISSN:   2395-4396
Volume/Issue:    Volume 4 Issue 2 2018
DUI:    16.0415/IJARIIE-7718
Licence: :   IJARIIE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Author NameAuthor Institute
Harshkumar Prabhudas BumtariyaVadodara Institute of Engineering
Sanjaykumar AsondariyaVadodara Institute of Engineering

Abstract

Mechanical Engineering
Helical gear, Finite element analysis, Delrin-100, Bending stress, Von-Mises stress.
Gears are one of the most critical components in mechanical power transmission systems. The bending and surface strength of the gear tooth are considered to be one of the main contributors for the failure of the gear in a gear set. Thus, analysis of stresses has become popular as an area of research on gears to minimize or to reduce the failures and for optimal design of gears. This paper investigates the characteristics of an involute helical gear system mainly focused on bending and contact stresses using analytical and finite element analysis. Primary objective of this paper is to observe the effects of polymers which gives more benefits than the metallic gears like noise reduction, less vibration, lower maintenance, lower lubrication, low cost and easy to manufacture for the optimization. Static finite element analysis is required of both the materials. In this paper optimization method is presented for the comparison of metallic and non-metallic gear using static FEA. Helix angle, face width, pressure angle and module are important geometrical parameters in determining the state of stresses during the design of gears. Thus, in this work a parametric study is conducted by varying the helix angle, face width, pressure angle and module to study their effect on the bending stress of helical gear.

Citations

Copy and paste a formatted citation or use one of the links to import into a bibliography manager and reference.

IJARIIE Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. "PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM" International Journal Of Advance Research And Innovative Ideas In Education Volume 4 Issue 2 2018 Page 3879-3887
MLA Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. "PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM." International Journal Of Advance Research And Innovative Ideas In Education 4.2(2018) : 3879-3887.
APA Harshkumar Prabhudas Bumtariya, & Sanjaykumar Asondariya. (2018). PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM. International Journal Of Advance Research And Innovative Ideas In Education, 4(2), 3879-3887.
Chicago Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. "PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM." International Journal Of Advance Research And Innovative Ideas In Education 4, no. 2 (2018) : 3879-3887.
Oxford Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. 'PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM', International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 2, 2018, p. 3879-3887. Available from IJARIIE, http://ijariie.com/AdminUploadPdf/PARAMETRIC_ANALYSIS_OF_NON_METALLIC_HELICAL_GEAR_BY_USING_FEM_ijariie7718.pdf (Accessed : ).
Harvard Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. (2018) 'PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM', International Journal Of Advance Research And Innovative Ideas In Education, 4(2), pp. 3879-3887IJARIIE [Online]. Available at: http://ijariie.com/AdminUploadPdf/PARAMETRIC_ANALYSIS_OF_NON_METALLIC_HELICAL_GEAR_BY_USING_FEM_ijariie7718.pdf (Accessed : )
IEEE Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya, "PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM," International Journal Of Advance Research And Innovative Ideas In Education, vol. 4, no. 2, pp. 3879-3887, Mar-App 2018. [Online]. Available: http://ijariie.com/AdminUploadPdf/PARAMETRIC_ANALYSIS_OF_NON_METALLIC_HELICAL_GEAR_BY_USING_FEM_ijariie7718.pdf [Accessed : ].
Turabian Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. "PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM." International Journal Of Advance Research And Innovative Ideas In Education [Online]. volume 4 number 2 ().
Vancouver Harshkumar Prabhudas Bumtariya, and Sanjaykumar Asondariya. PARAMETRIC ANALYSIS OF NON-METALLIC HELICAL GEAR BY USING FEM. International Journal Of Advance Research And Innovative Ideas In Education [Internet]. 2018 [Cited : ]; 4(2) : 3879-3887. Available from: http://ijariie.com/AdminUploadPdf/PARAMETRIC_ANALYSIS_OF_NON_METALLIC_HELICAL_GEAR_BY_USING_FEM_ijariie7718.pdf
BibTex EndNote RefMan RefWorks

Number Of Downloads



Save in Google Drive

Similar-Paper

TitleArea of ResearchAuther NameAction
PERFORMANCE CHARACTERISTICS OF DIESEL ENGINE USING ALTERNATE FUELSMechanical EngineeringK.Krishna Reddy Download
OPTIMIZATION OF ROUTING AND SCHEDULING LAYOUT BY USING FLEXSIMMechanical EngineeringG. Gopinath Download
Stress Concentration Analysis and validation through Cutout Orientation in PlatesMechanical Engineering Pooja Kumar Budhner Download
ELECTRO PNEUMATIC 6 DEGREE OF FREEDOM ROBOTIC ARMMECHANICAL ENGINEERINGMS.MOHAMED SHIJAB AHAMED Download
Mechatronic Control Unit For Pneumatic OperationsMechanical EngineeringSyed Kalam Download
Characterization of Gas Turbine Blade with Different Materials through Frequency Response by Modal and Dynamic AnalysisMechanical EngineeringDEVADA DHARMENDHAR REDDY Download
Comparison of variations of bamboo fiber reinforced epoxy composite with adding powder material for bulletproof applicationMechanical Engineering Ansor Salim Siregar Download
Performance Analysis of an Overhead Power Transmission Line TowerMECHANICAL ENGINEERINGVasant Dinkar Mestry Download
Enhancement of cooling system performance of cold storage by using Salt, Glycol, and Methanol based Phase Changing MaterialsMechanical EngineeringSilviana Simbolon Download
Study of Overall Equipment Effectiveness of Manufacturing SystemMechanical EngineeringM.S.Kaingade Download
Automatic cooling coverall for workers confort.Automatic coolingYubraj Dhakal Download
ECO FRIENDLY POWER TILLER MACHINEMechanicalC. Anbumeenakshi Download
A STUDY ON SEALING PERFORMANCE OF FLANGED JOINT WITH GASKETS USING FINITE ELEMENT ANALYSIS WITH FINAL RESULTMechanical EngineeringTAYADE MINAL VIJAY Download
A STUDY ON SEALING PERFORMANCE OF FLANGED JOINT WITH GASKETS USING FINITE ELEMENT ANALYSISMechanical EngineeringTayade Minal Vijay Download
DESIGN & ANALYSIS OF PRESSURE SAFETY RELEASE VALVE BY USING FINITE ELEMENT ANALYSIS WITH FINAL RESULTMechanical EngineeringSHIRSALE MAHESH YASHWANT Download
12