Optimization and prediction of dilution percentage in submerged arc welding process

May 2019
Vol-5, Issue-3
Paper ID: 10249
ISSN: 2395-4396
Downloads: 57
Download PDF

Abstract & Details

Research Area
Mechanical Engineering
Keywords
Taguchi method Dilution Grey relational analysis S/N ratio .
Abstract
Weld dilution is an important feature of weld bead geometry that determines the mechanical and chemical properties of a welded joint. For submerged arc welding, several welding process parameters are reported to be controlling the dilution. This paper presents the effect of welding parameters like welding speed, welding current and voltage on penetration over mild steel plates. Three levels and three factors full factorial design method was used for conducting the experimental runs and linear regression models were developed accordingly. Nine experimental runs (L9) based on an orthogonal array Taguchi method were performed. The adequacy of the models was tested by applying S/N ratio and the predicted values from the models were plotted against the observed values through scatter diagram. Results showed that the proposed two level full factorial empirical models could predict the weld dilution with reasonable accuracy and ensure uniform weld quality. By using the Grey Relational Analysis technique, optimization of the complicated multiple process responses can be converted into optimization of a single grey relational grade and Optimization of a factor is the level with the highest grey relational grade

Author Information

# Name Institute / Affiliation
1 Mr.S.Praveen Gnanamani College of Technology
2 Mr.S.Praveenkumar Gnanamani College of Technology

How to Cite

Use the following formats to cite this article in your research.

APA Style
Mr.S.Praveen & Mr.S.Praveenkumar (2019). Optimization and prediction of dilution percentage in submerged arc welding process. International Journal of Advance Research and Innovative Ideas In Education, 5(3), 340-347.
MLA Style
Mr.S.Praveen, and Mr.S.Praveenkumar. "Optimization and prediction of dilution percentage in submerged arc welding process." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 3, 2019, pp. 340-347.
IEEE Style
Mr.S.Praveen and Mr.S.Praveenkumar, "Optimization and prediction of dilution percentage in submerged arc welding process," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 3, pp. 340-347, 2019.
Vancouver Style
Mr.S.Praveen, Mr.S.Praveenkumar. Optimization and prediction of dilution percentage in submerged arc welding process. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(3):340-347.
Harvard Style
Mr.S.Praveen & Mr.S.Praveenkumar (2019) 'Optimization and prediction of dilution percentage in submerged arc welding process', International Journal of Advance Research and Innovative Ideas In Education, 5(3), pp. 340-347.
Chicago Style
Mr.S.Praveen and Mr.S.Praveenkumar. "Optimization and prediction of dilution percentage in submerged arc welding process." International Journal of Advance Research and Innovative Ideas In Education 5, no. 3 (2019): 340-347.
Turabian Style
Mr.S.Praveen and Mr.S.Praveenkumar. "Optimization and prediction of dilution percentage in submerged arc welding process." International Journal of Advance Research and Innovative Ideas In Education 5, no. 3 (2019): 340-347.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF