Effect of Lubrication Condition on Surface Roughness in Facing Operation

October 2015
Vol-1, Issue-2
Paper ID: 1152
ISSN: 2395-4396
Downloads: 69
Download PDF

Abstract & Details

Research Area
Mechanical Engineering
Keywords
Surface Roughness Cutting speed Cutting fluid Lubricant
Abstract
Smooth surface and lower friction is the first and foremost thinking in modern manufacturing process. So, after facing operation a smoother surface is first requirement. During facing operation high friction increases the temperature at high level. Such high temperature causes various problems like a high tool wear, large heat affected zone, change in hardness and microstructure of the work piece, burning and its consequence and high surface roughness. Application of conventional cutting fluids reduces the above problems to some extent through cooling and lubricating of the facing zone. But its result changes with the change of cutting fluid utilization and change of the cutting speed. In this research work different amount of cutting fluid is used and its effect on the surface roughness has investigated for the three different materials like mild steel, aluminium & cast iron. The facing operation was done for a constant spindle speed and other parameter like feed rate kept constant for dry, semi dry and wet machining. The experimental results reveal that lubrication condition during facing operation effect roughness of those metal surfaces. The optimum cutting fluids lead to economical benefit and environmental friendly machining.

Author Information

# Name Institute / Affiliation
1 Md. Nizam Uddin Khulna University of Engineering & Technology
2 Sudipta Kumar Saha Khulna University of Engineering & Technology
3 Md. Sulaiman Hossain Khulna University of Engineering & Technology

How to Cite

Use the following formats to cite this article in your research.

APA Style
Uddin, Md. Nizam, Saha, Sudipta Kumar, & Hossain, Md. Sulaiman (2015). Effect of Lubrication Condition on Surface Roughness in Facing Operation. International Journal of Advance Research and Innovative Ideas In Education, 1(2), 227-232.
MLA Style
Uddin, Md. Nizam, et al. "Effect of Lubrication Condition on Surface Roughness in Facing Operation." International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 2, 2015, pp. 227-232.
IEEE Style
Md. Nizam Uddin, Sudipta Kumar Saha, and Md. Sulaiman Hossain, "Effect of Lubrication Condition on Surface Roughness in Facing Operation," International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 2, pp. 227-232, 2015.
Vancouver Style
Uddin Md. Nizam, Saha Sudipta Kumar, Hossain Md. Sulaiman. Effect of Lubrication Condition on Surface Roughness in Facing Operation. International Journal of Advance Research and Innovative Ideas In Education. 2015;1(2):227-232.
Harvard Style
Uddin, Md. Nizam, Saha, Sudipta Kumar, & Hossain, Md. Sulaiman (2015) 'Effect of Lubrication Condition on Surface Roughness in Facing Operation', International Journal of Advance Research and Innovative Ideas In Education, 1(2), pp. 227-232.
Chicago Style
Uddin, Md. Nizam, Sudipta Kumar Saha, and Md. Sulaiman Hossain. "Effect of Lubrication Condition on Surface Roughness in Facing Operation." International Journal of Advance Research and Innovative Ideas In Education 1, no. 2 (2015): 227-232.
Turabian Style
Uddin, Md. Nizam, Sudipta Kumar Saha, and Md. Sulaiman Hossain. "Effect of Lubrication Condition on Surface Roughness in Facing Operation." International Journal of Advance Research and Innovative Ideas In Education 1, no. 2 (2015): 227-232.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF