FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE

June 2020
Vol-6, Issue-3
Paper ID: 12105
ISSN: 2395-4396
Downloads: 62
Download PDF

Abstract & Details

Research Area
Mechanical Engineering
Keywords
Hover bike AFV Manoeuvre propellers Prototype Thrust CatiaV5 Solid Works
Abstract
The Hover bike prototype is a one-third scaled model of full-sized Hover bike (manned). This is an attempt to develop a prototype having propellers that are driven electrically integrating tilt motor mechanism, where servo motors are used to manoeuvre the model. The objective is to fabricate a light-weight weight prototype that contains a payload bay, attain longer endurance and range, reduction in the cost, utilize less power to realize lift, provide longer battery life, reduce programming steps and be simple in design compared to the prevailing drones. The mechanical design of the AFV comprised both the choice of a battery-motor gearing-prop combination for efficient thrust production as well as the planning of a light-weight yet sufficiently stiff vehicle structure. In addition to an efficient mechanical design, the vehicle also required onboard control and inertial guidance.

Author Information

# Name Institute / Affiliation
1 Ankit R. Zade Sir Visvesvaraya Institute of Technology, Nashik
2 Rushikesh R. Ugale Sir Visvesvaraya Institute of Technology, Nashik
3 Shubham S. Aher Sir Visvesvaraya Institute of Technology, Nashik
4 Shubham P. Sonawane Sir Visvesvaraya Institute of Technology, Nashik

How to Cite

Use the following formats to cite this article in your research.

APA Style
Zade, Ankit R., Ugale, Rushikesh R., Aher, Shubham S., & Sonawane, Shubham P. (2020). FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE. International Journal of Advance Research and Innovative Ideas In Education, 6(3), 1044-1047.
MLA Style
Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education, vol. 6, no. 3, 2020, pp. 1044-1047.
IEEE Style
Ankit R. Zade, Rushikesh R. Ugale, Shubham S. Aher, and Shubham P. Sonawane, "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE," International Journal of Advance Research and Innovative Ideas In Education, vol. 6, no. 3, pp. 1044-1047, 2020.
Vancouver Style
Zade Ankit R., Ugale Rushikesh R., Aher Shubham S., Sonawane Shubham P.. FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE. International Journal of Advance Research and Innovative Ideas In Education. 2020;6(3):1044-1047.
Harvard Style
Zade, Ankit R., Ugale, Rushikesh R., Aher, Shubham S., & Sonawane, Shubham P. (2020) 'FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE', International Journal of Advance Research and Innovative Ideas In Education, 6(3), pp. 1044-1047.
Chicago Style
Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education 6, no. 3 (2020): 1044-1047.
Turabian Style
Zade, Ankit R., et al. "FABRICATION AND TESTING THE PROTOTYPE OF HAVOR BIKE." International Journal of Advance Research and Innovative Ideas In Education 6, no. 3 (2020): 1044-1047.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF