Finite Element Simulation and Investigation of Thin Wall Impeller Casting

December 2015
Vol-1, Issue-5
Paper ID: 1512
ISSN: 2395-4396
Downloads: 66
Download PDF

Abstract & Details

Research Area
Mechanical Design Engineering
Keywords
Casting Thin Wall Impeller Casting Defects Simulation
Abstract
In case of casting of thin wall impeller structure, the prediction of shrinkage defect is a difficult operation and failure of such thin wall structure is a commonly encountered problem. Such failures are due to non-uniform heat transfer rate. The uniformity of heat transfer rate may enhance by placing the runner at appropriate position and riser based on the geometrical attributes. An attempt is made for the analysis of optimization in the placement of runner and riser. The present work focuses on the simulation of aluminum thin wall pump impeller blade using commercially available software (ANSYS) and experiments for optimum placement of risers and reducing defects.

Author Information

# Name Institute / Affiliation
1 Vinit A. Bijagare GSMCOE, Pune (Savitribai Phule Pune University, Pune)
2 Dr.Vikas R. Deulgaonkar Marathwada Mitra Mandal's College of Engineering, Pune (Savitribai Phule Pune University, Pune)
3 Prof. Anup A. Bijagare Sinhgad Academy of Engineering, Pune (Savitribai Phule Pune University, Pune)

How to Cite

Use the following formats to cite this article in your research.

APA Style
Bijagare, Vinit A., Deulgaonkar, Dr.Vikas R., & Bijagare, Prof. Anup A. (2015). Finite Element Simulation and Investigation of Thin Wall Impeller Casting. International Journal of Advance Research and Innovative Ideas In Education, 1(5), 778-784.
MLA Style
Bijagare, Vinit A., et al. "Finite Element Simulation and Investigation of Thin Wall Impeller Casting." International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, 2015, pp. 778-784.
IEEE Style
Vinit A. Bijagare, Dr.Vikas R. Deulgaonkar, and Prof. Anup A. Bijagare, "Finite Element Simulation and Investigation of Thin Wall Impeller Casting," International Journal of Advance Research and Innovative Ideas In Education, vol. 1, no. 5, pp. 778-784, 2015.
Vancouver Style
Bijagare Vinit A., Deulgaonkar Dr.Vikas R., Bijagare Prof. Anup A.. Finite Element Simulation and Investigation of Thin Wall Impeller Casting. International Journal of Advance Research and Innovative Ideas In Education. 2015;1(5):778-784.
Harvard Style
Bijagare, Vinit A., Deulgaonkar, Dr.Vikas R., & Bijagare, Prof. Anup A. (2015) 'Finite Element Simulation and Investigation of Thin Wall Impeller Casting', International Journal of Advance Research and Innovative Ideas In Education, 1(5), pp. 778-784.
Chicago Style
Bijagare, Vinit A., Dr.Vikas R. Deulgaonkar, and Prof. Anup A. Bijagare. "Finite Element Simulation and Investigation of Thin Wall Impeller Casting." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 778-784.
Turabian Style
Bijagare, Vinit A., Dr.Vikas R. Deulgaonkar, and Prof. Anup A. Bijagare. "Finite Element Simulation and Investigation of Thin Wall Impeller Casting." International Journal of Advance Research and Innovative Ideas In Education 1, no. 5 (2015): 778-784.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF