OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE

May 2022
Vol-8, Issue-3
Paper ID: 16666
ISSN: 2395-4396
Downloads: 64
Download PDF

Abstract & Details

Research Area
Mechanical Engineering
Keywords
CNC Turning Taguchi method Surface Roughness ANOVA Minitab 16.
Abstract
Surface roughness determines how a real object interacts with its environment. Rough surfaces usually wear more quickly and have high friction coefficient than smooth surfaces. Roughness is often a good predictor of the performance of mechanical components, since irregularities in the surface may form nucleation sites for cracks or corrosion. In this work attention is given to investigate, the effect of cutting parameters mainly Feed, Depth of Cut, Tool nose radius on Surface Roughness by keeping cutting speed constant in CNC turning operation. The experiments were performed on SS304 Using Taguchi method. A three level, three Factor design of experiment prepared according to Taguchi orthogonal array L9 using Minitab 16 software. The Analysis of Variance (ANOVA) and Signal to Noise (S/N) Ratio was carried to find out the most significant factor and percentage contribution of individual factor for Surface Roughness and Material Removal Rate. The all experiments were performed at dry condition. From result it is found that optimum level of cutting parameters for Surface Roughness are obtained at feed of 0.15 mm/rev, depth of cut of 0.2 mm, tool nose radius of 0.8 mm.

Author Information

# Name Institute / Affiliation
1 Mr. P. N. Darandale JCOE, Kuran
2 Prof. G. N. Kadam JCOE, Kuran

How to Cite

Use the following formats to cite this article in your research.

APA Style
Darandale, Mr. P. N. & Kadam, Prof. G. N. (2022). OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE. International Journal of Advance Research and Innovative Ideas In Education, 8(3), 838-845.
MLA Style
Darandale, Mr. P. N., and Prof. G. N. Kadam. "OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education, vol. 8, no. 3, 2022, pp. 838-845.
IEEE Style
Mr. P. N. Darandale and Prof. G. N. Kadam, "OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE," International Journal of Advance Research and Innovative Ideas In Education, vol. 8, no. 3, pp. 838-845, 2022.
Vancouver Style
Darandale Mr. P. N., Kadam Prof. G. N.. OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE. International Journal of Advance Research and Innovative Ideas In Education. 2022;8(3):838-845.
Harvard Style
Darandale, Mr. P. N. & Kadam, Prof. G. N. (2022) 'OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE', International Journal of Advance Research and Innovative Ideas In Education, 8(3), pp. 838-845.
Chicago Style
Darandale, Mr. P. N. and Prof. G. N. Kadam. "OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education 8, no. 3 (2022): 838-845.
Turabian Style
Darandale, Mr. P. N. and Prof. G. N. Kadam. "OPTIMIZATION OF TURNING PARAMETERS BASED ON SURFACE ROUGHNESS USING OPTIMIZATION TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education 8, no. 3 (2022): 838-845.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF