A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW

May 2016
Vol-2, Issue-3
Paper ID: 2399
ISSN: 2395-4396
Downloads: 56
Download PDF

Abstract & Details

Research Area
Mechanical Engineering
Keywords
Flame Spray coating Extruder screw Taguchi’s orthogonal array Analysis of variance.
Abstract
Flame spray coating is a coating technique used extensively in industrial application to enhance the performance of engineering component like extruder screw, shafts & plunger ring set. Improved resistance to wear can be achieved, which eventually extend the life of component. Due to its simplicity in process and low initial cost of setup Flame spray coating techniques are widely used for coating on extruder screw. The deposition efficiency then becomes a vital output to survive in today’s competitive market. The deposition efficiency i.e. the raw material consumption depends upon the spraying process parameters. This paper focuses on tracing out various process parameters which has influence on deposition efficiency, coating thickness and quality of coating in thermal spray coating processes. Design of experiment such as Taguchi’s experimental design can be used for the optimizing these process parameters. Analysis of variance can then be useful to identify significant process parameters.

Author Information

# Name Institute / Affiliation
1 Ashish Pandya Venus International College of Technology, Gandhinagar, Gujarat(India)
2 Ketan Sathavara Venus International College of Technology, Gandhinagar, Gujarat(India)

How to Cite

Use the following formats to cite this article in your research.

APA Style
Pandya, Ashish & Sathavara, Ketan (2016). A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW. International Journal of Advance Research and Innovative Ideas In Education, 2(3), 2166-2171.
MLA Style
Pandya, Ashish, and Ketan Sathavara. "A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, 2016, pp. 2166-2171.
IEEE Style
Ashish Pandya and Ketan Sathavara, "A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 3, pp. 2166-2171, 2016.
Vancouver Style
Pandya Ashish, Sathavara Ketan. A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(3):2166-2171.
Harvard Style
Pandya, Ashish & Sathavara, Ketan (2016) 'A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW', International Journal of Advance Research and Innovative Ideas In Education, 2(3), pp. 2166-2171.
Chicago Style
Pandya, Ashish and Ketan Sathavara. "A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 2166-2171.
Turabian Style
Pandya, Ashish and Ketan Sathavara. "A REVIEW – OPTIMIZE THE PROCESS PARAMETER FOR RAW MATERIAL CONSUMPTION FOR SPECIFIED DRY FILM THICKNESS IN FLAME SPRAY COATING ON EXTRUDER SCREW." International Journal of Advance Research and Innovative Ideas In Education 2, no. 3 (2016): 2166-2171.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF