Effect of contact ratio on spur gears using model-based analysis and simulation

July 2016
Vol-2, Issue-4
Paper ID: 2954
ISSN: 2395-4396
Downloads: 65
Download PDF

Abstract & Details

Research Area
Modelling and Simulation
Keywords
Spur gears Contact ratio MATLAB Tooth stiffness Vibration response simulation.
Abstract
Gears are machine elements used to transmit rotary motion between two shafts, normally with a constant ratio. This paper presents a computer modelling and simulation showing how the gear contact ratio affects a spur gear system. The analysis presented in this paper is performed by using a Six Degree of Freedom (6DOF) dynamic model of a one-stage spur gear system. In the analysis, the contact ratio was varied over the range 1.6456 to 2.1256. In order to simplify the analysis, other parameters related to contact ratio were held constant. The simulation was performed using MATLAB and the model was tested at two frequencies of 570 and 833 Hz. The contact ratio was found to have a significant influence on gear dynamics. A contact ratio close to 2 provided maximum values for Minimum and Maximum tooth stiffness at both the tested frequencies. The paper derives the conclusion that contact ratio 2 is best suited to the model under consideration to obtain highest tooth stiffness.

Author Information

# Name Institute / Affiliation
1 Pradeep Kumar Mehta Institute of Engineering & Technology, DAVV University, Indore, Madhya Pradesh, India.
2 Vijay Karma Institute of Engineering & Technology, DAVV University, Indore, Madhya Pradesh, India.

How to Cite

Use the following formats to cite this article in your research.

APA Style
Mehta, Pradeep Kumar & Karma, Vijay (2016). Effect of contact ratio on spur gears using model-based analysis and simulation. International Journal of Advance Research and Innovative Ideas In Education, 2(4), 846-855.
MLA Style
Mehta, Pradeep Kumar, and Vijay Karma. "Effect of contact ratio on spur gears using model-based analysis and simulation." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 4, 2016, pp. 846-855.
IEEE Style
Pradeep Kumar Mehta and Vijay Karma, "Effect of contact ratio on spur gears using model-based analysis and simulation," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 4, pp. 846-855, 2016.
Vancouver Style
Mehta Pradeep Kumar, Karma Vijay. Effect of contact ratio on spur gears using model-based analysis and simulation. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(4):846-855.
Harvard Style
Mehta, Pradeep Kumar & Karma, Vijay (2016) 'Effect of contact ratio on spur gears using model-based analysis and simulation', International Journal of Advance Research and Innovative Ideas In Education, 2(4), pp. 846-855.
Chicago Style
Mehta, Pradeep Kumar and Vijay Karma. "Effect of contact ratio on spur gears using model-based analysis and simulation." International Journal of Advance Research and Innovative Ideas In Education 2, no. 4 (2016): 846-855.
Turabian Style
Mehta, Pradeep Kumar and Vijay Karma. "Effect of contact ratio on spur gears using model-based analysis and simulation." International Journal of Advance Research and Innovative Ideas In Education 2, no. 4 (2016): 846-855.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF