ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER

October 2016
Vol-2, Issue-5
Paper ID: 3196
ISSN: 2395-4396
Downloads: 88
Download PDF

Abstract & Details

Research Area
electrical engineering
Keywords
DC-DC Converter Push-Pull Converter Mosfet ZVS ZCS
Abstract
This paper presents analysis and design of push/pull converter with ZVS and ZCS control. The proposed converter has the following features: 1) zero-current commutation (ZCC) and natural voltage clamping (NVC) eliminate the need for active-clamp circuits or passive snubbers required to absorb surge voltage in conventional current-fed topologies. 2) Switching losses are reduced significantly owing to zero-current switching of primary-side devices and zero-voltage switching of secondary-side devices. Turn-on switching transition loss of primary devices is also negligible. 3) Soft switching and NVC are inherent and load independent. 4) The voltage across primary-side device is independent of duty cycle with varying input voltage and output power and clamped at rather low reflected output voltage enabling the use of low-voltage semiconductor devices. These merits make the converter good candidate for interfacing low-voltage dc bus with high-voltage dc bus for higher current applications. Steady state analysis, and simulation results are presented using MATLAB software.

Author Information

# Name Institute / Affiliation
1 K. Arun jyothismathi Institute of technology and science
2 Ch. Sajan Rao jyothismathi Institute of technology and science

How to Cite

Use the following formats to cite this article in your research.

APA Style
Arun, K. & Rao, Ch. Sajan (2016). ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER. International Journal of Advance Research and Innovative Ideas In Education, 2(5), 890-899.
MLA Style
Arun, K., and Ch. Sajan Rao. "ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER." International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 5, 2016, pp. 890-899.
IEEE Style
K. Arun and Ch. Sajan Rao, "ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER," International Journal of Advance Research and Innovative Ideas In Education, vol. 2, no. 5, pp. 890-899, 2016.
Vancouver Style
Arun K., Rao Ch. Sajan. ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER. International Journal of Advance Research and Innovative Ideas In Education. 2016;2(5):890-899.
Harvard Style
Arun, K. & Rao, Ch. Sajan (2016) 'ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER', International Journal of Advance Research and Innovative Ideas In Education, 2(5), pp. 890-899.
Chicago Style
Arun, K. and Ch. Sajan Rao. "ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER." International Journal of Advance Research and Innovative Ideas In Education 2, no. 5 (2016): 890-899.
Turabian Style
Arun, K. and Ch. Sajan Rao. "ANALYSIS AND DESIGN OF A PUSH–PULL DC-DC QUASI-RESONANT CONVERTER." International Journal of Advance Research and Innovative Ideas In Education 2, no. 5 (2016): 890-899.

Export Citation

Related Research

Solar Microgrid with Smart IoT Monitoring
Mrs. Tarakeshwari V et al. 2026 Renewable Energy Systems, Smart Microgrids, and IoT
Download PDF
Review of Recent Advances in Solar Energy Technology
Prof. Vishal Pratap Mahajan 2026 Electrical Engineering- Solar Energy Technology
Download PDF