DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE
Abstract & Details
Research Area
Mechanical Engineering
Keywords
Gear Defects
Vibration Analysis
Finite Element Analysis
Acoustic Signal
Tooth Breakage
Raw Vibration Signals
Abstract
In gearboxes, load fluctuations on the gearbox and gear defects are two major sources of vibration. Further, at times, measurement of vibration in the gearbox is not easy because of the inaccessibility in mounting the vibration transducers. Vibration analysis techniques are used for detection of fault in gear system, fluctuation in gear load such as a method for monitoring the evolution of gear faults based on the newly developed time- frequency analysis through FEA, in which analysis is carried out with the decomposed current signal to trace the sidebands of the high frequencies of vibration,. It is also helpful tool for health monitoring of gears. Acoustic signal can be used effectively along vibration signal to detect the various local faults in gearboxes using the wavelet transform technique. Two commonly encountered local faults, tooth breakage and tooth crack were simulated. In fault simulating, two very similar models of worn gear have been considered with partial difference for evaluating the preciseness of the proposed algorithm. Moreover, the processing of vibration signals has become much more difficult because a full-of-oil complex gearbox system has been considered to record raw vibration signals. Raw vibration signals were segmented into the signals recorded during one complete revolution of the input shaft using tachometer information and then synchronized using piecewise cubic hermit interpolation to construct the sample signals with the same length.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Bhushan J.Vispute | Shri. Sureshdada Jain College of Engineering Jalgaon |
| 2 | Prof.Rajesh R.Borse | Shri. Sureshdada Jain College of Engineering Jalgaon |
| 3 | Prof. Rushikesh D.Sonar | Sandip Institute of Polytechnic (sandip foundations), Nashik |
| 4 | Prof.Tushar C.Jagtap | Sandip Institute of Polytechnic (sandip foundations), Nashik |
How to Cite
Use the following formats to cite this article in your research.
APA Style
J.Vispute, Bhushan, R.Borse, Prof.Rajesh, D.Sonar, Prof. Rushikesh, & C.Jagtap, Prof.Tushar (2017). DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 951-960.
MLA Style
J.Vispute, Bhushan, et al. "DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 951-960.
IEEE Style
Bhushan J.Vispute, Prof.Rajesh R.Borse, Prof. Rushikesh D.Sonar, and Prof.Tushar C.Jagtap, "DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 951-960, 2017.
Vancouver Style
J.Vispute Bhushan, R.Borse Prof.Rajesh, D.Sonar Prof. Rushikesh, C.Jagtap Prof.Tushar. DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):951-960.
Harvard Style
J.Vispute, Bhushan, R.Borse, Prof.Rajesh, D.Sonar, Prof. Rushikesh, & C.Jagtap, Prof.Tushar (2017) 'DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 951-960.
Chicago Style
J.Vispute, Bhushan, et al. "DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 951-960.
Turabian Style
J.Vispute, Bhushan, et al. "DETECTION OF GEAR TOOTH DEFECTS BY USING MATLAB & FEA TECHNIQUE." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 951-960.
Related Research
CONCEPTUALIZATION DEVELOPMENT OF A SMART STAIR-CLIMBING TROLLEY FOR MULTI-STOREY BUILDINGS USING DC POWER SYSTEM
Download PDF
EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS
Download PDF
Experimental And Numerical Investigation On Improving Cooling Performance Of Heat Sink.
Download PDF