PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625

April 2017
Vol-3, Issue-2
Paper ID: 4799
ISSN: 2395-4396
Downloads: 69
Download PDF

Abstract & Details

Research Area
MECHANICAL ENGINEERING
Keywords
Hard Turning Surface roughness MRR Temperature cutting force Optimization
Abstract
In this thesis the results of an experimental investigation about the effect on Inconel-625 during hard turning using cubic boron nitride (CBN) based ceramic cutting tool. Turning experiments were carried out at different cutting speeds, feed rates and depth of cut .Tool performance was evaluated with respect to temperature, cutting forces, surface roughness and material removal rate generated during turning. The effect of cutting speed, depth of cut and feed rate on temperature, cutting forces, surface roughness and material removal rate during hard turning of Inconel-625 was experimented and analyzed by using taguchi method. The orthogonal array used for optimization. Than optimize the temperature, cutting forces, surface roughness and material removal rate using analysis of variance (ANOVA) Regression and Grey Relational Analysis (GRA) method

Author Information

# Name Institute / Affiliation
1 LALITBHAI PATEL KALOL INSTITUTE OF TECHNOLOGY & RESEARCH CENTRE KALOL
2 PRITESH PRAJAPATI KALOL INSTITUTE OF TECHNOLOGY & RESEARCH CENTRE KALOL

How to Cite

Use the following formats to cite this article in your research.

APA Style
PATEL, LALITBHAI & PRAJAPATI, PRITESH (2017). PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 4462-4472.
MLA Style
PATEL, LALITBHAI, and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 4462-4472.
IEEE Style
LALITBHAI PATEL and PRITESH PRAJAPATI, "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 4462-4472, 2017.
Vancouver Style
PATEL LALITBHAI, PRAJAPATI PRITESH. PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):4462-4472.
Harvard Style
PATEL, LALITBHAI & PRAJAPATI, PRITESH (2017) 'PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 4462-4472.
Chicago Style
PATEL, LALITBHAI and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4462-4472.
Turabian Style
PATEL, LALITBHAI and PRITESH PRAJAPATI. "PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING TURNING OF INCONEL-625." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 4462-4472.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF