A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING

April 2017
Vol-3, Issue-2
Paper ID: 4935
ISSN: 2395-4396
Downloads: 82
Download PDF

Abstract & Details

Research Area
MECHANICAL ENGINEERING
Keywords
The study shows that dynamic milling methods can give several benefits regarding material removal rate material removed the tools wear and lifetime. By achieving a higher material removal rate the tools productivity increases dramatically. In addition the surface also achieves a finer smoothness than the conventional parameters.
Abstract
Milling is a commonly used machining process where a rotating cutter removes material from the workpiece. In recent years, attention has been turned towards so called dynamic milling methods which differ from the conventional way of milling. Dynamic milling normally uses, as opposed to the conventional way, more of the axial cutting edge, smaller radial depth of cut, significantly higher cutting speed and feed per tooth. The method has demonstrated potential to save both time and money under specific circumstances, for manufacturing companies. The results of this study show that dynamic milling parameters can give several benefits regarding tool life and material removal rate and minimize machining cost. When machining in Hardox 600 end mills able to achieve a higher material removal rate and cutting tool lifetime with dynamic parameters compared to more conventional ones Results from the analysis showed that the dynamic parameters generated a smoother surface while the surface results from Hardox were more equivocal. Dynamic milling is a method that often uses the full length of the tool combined with a small radial depth, higher cutting speed and feed per tooth. This can potentially increase the material removal rate significantly compared to traditional methods. Dynamic milling techniques also use a toolpath programmed to achieve the most efficient cut. This is often done by keeping the tools angle of engagement constant through the operation in order to keep a consistent load. The main conclusion was that milling with dynamic parameters is generally more advantageous and should be utilised, if possible.

Author Information

# Name Institute / Affiliation
1 MANVIJAYSINH GANPATSINH CHAUHAN SB POLYTECHNIC KJ CAMPUS SAVLI VADODARA

How to Cite

Use the following formats to cite this article in your research.

APA Style
CHAUHAN, MANVIJAYSINH GANPATSINH (2017). A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 5336-5343.
MLA Style
CHAUHAN, MANVIJAYSINH GANPATSINH. "A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 5336-5343.
IEEE Style
MANVIJAYSINH GANPATSINH CHAUHAN, "A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 5336-5343, 2017.
Vancouver Style
CHAUHAN MANVIJAYSINH GANPATSINH. A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):5336-5343.
Harvard Style
CHAUHAN, MANVIJAYSINH GANPATSINH (2017) 'A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 5336-5343.
Chicago Style
CHAUHAN, MANVIJAYSINH GANPATSINH. "A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5336-5343.
Turabian Style
CHAUHAN, MANVIJAYSINH GANPATSINH. "A STUDY OF INCREASE TOOL LIFE OF MILLING MACHINE USING DYNAMIC MILLING." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5336-5343.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF