DESIGN AND DEVELOPMENT OF BENDING DIE

May 2018
Vol-4, Issue-3
Paper ID: 8562
ISSN: 2395-4396
Downloads: 66
Download PDF

Abstract & Details

Research Area
mechanical engineering
Keywords
appe piaggio bending non-cutting press work.
Abstract
In this paper, the bending tool is designed for appe piaggio. It can reduced the various factors which is uneconomical for industry. Now day’s sheet metal processes are widely used in all industries. It is an economical as well as effective process, which helps to forming a various tools. Bending is one of the most important operation which is perform on press machine. Bending is a non-cutting operation performed on press. Bending requires a press tool to deform a component permanently to a required shape and is employed on many components such as trayes, boxes, brackets, clips etc. The work is bent by placing on the die and then forcing the punch on to it so as to take the shape between the die and the punch. When metal is bent, the outer surface is stretched and the inner surface is compressed. The radius of the corner must not be too small, otherwise too much stress will be set up and the material will crack on the outside.

Author Information

# Name Institute / Affiliation
1 AKSHAY B. GITE G. H. RAISONI COLLEGE OF ENGINEERING AND MANAGEMENT CHAS AHMEDNAGAR
2 MANGESH C. GITE G. H. RAISONI COLLEGE OF ENGINEERING AND MANAGEMENT CHAS AHMEDNAGAR
3 RAHUL V. DATIR G. H. RAISONI COLLEGE OF ENGINEERING AND MANAGEMENT CHAS AHMEDNAGAR
4 AMOL B. KOLHAL G. H. RAISONI COLLEGE OF ENGINEERING AND MANAGEMENT CHAS AHMEDNAGAR

How to Cite

Use the following formats to cite this article in your research.

APA Style
GITE, AKSHAY B., GITE, MANGESH C., DATIR, RAHUL V., & KOLHAL, AMOL B. (2018). DESIGN AND DEVELOPMENT OF BENDING DIE. International Journal of Advance Research and Innovative Ideas In Education, 4(3), 1175-1176.
MLA Style
GITE, AKSHAY B., et al. "DESIGN AND DEVELOPMENT OF BENDING DIE." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, 2018, pp. 1175-1176.
IEEE Style
AKSHAY B. GITE, MANGESH C. GITE, RAHUL V. DATIR, and AMOL B. KOLHAL, "DESIGN AND DEVELOPMENT OF BENDING DIE," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, pp. 1175-1176, 2018.
Vancouver Style
GITE AKSHAY B., GITE MANGESH C., DATIR RAHUL V., KOLHAL AMOL B.. DESIGN AND DEVELOPMENT OF BENDING DIE. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(3):1175-1176.
Harvard Style
GITE, AKSHAY B., GITE, MANGESH C., DATIR, RAHUL V., & KOLHAL, AMOL B. (2018) 'DESIGN AND DEVELOPMENT OF BENDING DIE', International Journal of Advance Research and Innovative Ideas In Education, 4(3), pp. 1175-1176.
Chicago Style
GITE, AKSHAY B., et al. "DESIGN AND DEVELOPMENT OF BENDING DIE." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 1175-1176.
Turabian Style
GITE, AKSHAY B., et al. "DESIGN AND DEVELOPMENT OF BENDING DIE." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 1175-1176.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF