Design and Analysis of suspension system components

May 2018
Vol-4, Issue-3
Paper ID: 8572
ISSN: 2395-4396
Downloads: 81
Download PDF

Abstract & Details

Research Area
Mechanical engineering
Keywords
Unsprung mass Mac-pherson Push rod Pull rod Knuckle.
Abstract
Normally in automobile Mac-pherson strut type suspension system is used. In this the spring and damper system is attached directly to the knuckle’s upper part via strut rod. The other end of the suspension must be connected to chassis. So, the overall height of the assembly increases. This increases the centre of gravity of car thus decreasing in performance. Pushrod and pull rod suspension systems are used in F! cars and High-performance Sports car, where centre of gravity plays an important role. This type of suspension system also reduces the unsprung mass of the vehicle. The unsprung to sprung mass ratio must be small. Polar moment of inertia of the vehicle should be small i.e. the mass should be concentrated as near to the centre of gravity as possible. The suspension system is designed by first quarter car model, then half car model and then full car model consisting of all the four wheels. Pull rod system is incorporated in front and Pushrod system at rear. Components are designed for both the static and dynamic conditions considering fatigue life also.

Author Information

# Name Institute / Affiliation
1 Manohar Gade D Y Patil college of engineering, Akurdi, Pune-411044
2 Rayees Shaikh D Y Patil college of engineering, Akurdi, Pune-411044
3 Deepak Bijamwar D Y Patil college of engineering, Akurdi, Pune-411044
4 Shubham Jambale D Y Patil college of engineering, Akurdi, Pune-411044
5 Vikram Kulkarni D Y Patil college of engineering, Akurdi, Pune-411044

How to Cite

Use the following formats to cite this article in your research.

APA Style
Gade, Manohar, Shaikh, Rayees, Bijamwar, Deepak, Jambale, Shubham, & Kulkarni, Vikram (2018). Design and Analysis of suspension system components. International Journal of Advance Research and Innovative Ideas In Education, 4(3), 1203-1210.
MLA Style
Gade, Manohar, et al. "Design and Analysis of suspension system components." International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, 2018, pp. 1203-1210.
IEEE Style
Manohar Gade, Rayees Shaikh, Deepak Bijamwar, Shubham Jambale, and Vikram Kulkarni, "Design and Analysis of suspension system components," International Journal of Advance Research and Innovative Ideas In Education, vol. 4, no. 3, pp. 1203-1210, 2018.
Vancouver Style
Gade Manohar, Shaikh Rayees, Bijamwar Deepak, Jambale Shubham, Kulkarni Vikram. Design and Analysis of suspension system components. International Journal of Advance Research and Innovative Ideas In Education. 2018;4(3):1203-1210.
Harvard Style
Gade, Manohar, Shaikh, Rayees, Bijamwar, Deepak, Jambale, Shubham, & Kulkarni, Vikram (2018) 'Design and Analysis of suspension system components', International Journal of Advance Research and Innovative Ideas In Education, 4(3), pp. 1203-1210.
Chicago Style
Gade, Manohar, et al. "Design and Analysis of suspension system components." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 1203-1210.
Turabian Style
Gade, Manohar, et al. "Design and Analysis of suspension system components." International Journal of Advance Research and Innovative Ideas In Education 4, no. 3 (2018): 1203-1210.

Export Citation

Related Research

COMPARATIVE EVALUATION OF SOLAR COLLECTORS FOR AQUA-AMMONIA ABSORPTION SYSTEMS
DIVYESHKUMAR T PATEL et al. 2026 SOLAR ENERGY,SOLAR REFRIGERATION,SOLAR COLLECTORS
Download PDF