Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique
Abstract & Details
Research Area
Mechanical Engineering
Keywords
FLCA
ANSYS
Finite Element Analysis
Topology Optimization.
Abstract
Front lower control arm (FLCA) is a component used in a suspension system of a light vehicle. It
plays a whittle role in handling the motion of the wheel during the bump, turning, and braking. The
scope here in this present work is to optimize the front lower control arm with respect to weight with
four different materials. Present work, the new design concept of FLCA is presented. CATIA software
has been used for the modeling, design concept of the FLCA. After that, ANSYS software is used to
analyze the structural strength and optimized the part using topology optimization technique to
achieve accurate dimensions with less mass. To verify the initial work, existing model has been taken
from literature as the base and verified it. The work also determines the natural frequency before and
after optimization. The target of the new design is 20% reduction of the overall mass of the front
FLCA which manufactured by suitable material. Finally, the work has been observed that using
topology optimization technique reduce mass of the FLCA without owing its responses.
License
This work is licensed under a Creative
Commons
Attribution-ShareAlike 4.0 International License.
Author Information
| # | Name | Institute / Affiliation |
|---|---|---|
| 1 | Aman K Patel | Vishwavidyalaya Engineering College, Lakhanpur |
| 2 | Pankaj Sidar | Vishwavidyalaya Engineering College, Lakhanpur |
| 3 | S. C. Gajbhiye | Vishwavidyalaya Engineering College, Lakhanpur |
How to Cite
Use the following formats to cite this article in your research.
APA Style
Patel, Aman K, Sidar, Pankaj, & Gajbhiye, S. C. (2019). Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique. International Journal of Advance Research and Innovative Ideas In Education, 5(1), 267-272.
MLA Style
Patel, Aman K, et al. "Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique." International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 1, 2019, pp. 267-272.
IEEE Style
Aman K Patel, Pankaj Sidar, and S. C. Gajbhiye, "Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique," International Journal of Advance Research and Innovative Ideas In Education, vol. 5, no. 1, pp. 267-272, 2019.
Vancouver Style
Patel Aman K, Sidar Pankaj, Gajbhiye S. C.. Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique. International Journal of Advance Research and Innovative Ideas In Education. 2019;5(1):267-272.
Harvard Style
Patel, Aman K, Sidar, Pankaj, & Gajbhiye, S. C. (2019) 'Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique', International Journal of Advance Research and Innovative Ideas In Education, 5(1), pp. 267-272.
Chicago Style
Patel, Aman K, Pankaj Sidar, and S. C. Gajbhiye. "Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique." International Journal of Advance Research and Innovative Ideas In Education 5, no. 1 (2019): 267-272.
Turabian Style
Patel, Aman K, Pankaj Sidar, and S. C. Gajbhiye. "Analysis and Optimization of FLCA Using Finite Element Based Topology Optimization Technique." International Journal of Advance Research and Innovative Ideas In Education 5, no. 1 (2019): 267-272.
Related Research
CONCEPTUALIZATION DEVELOPMENT OF A SMART STAIR-CLIMBING TROLLEY FOR MULTI-STOREY BUILDINGS USING DC POWER SYSTEM
Download PDF
EXPERIMENTAL ANALYSIS OF MECHANICAL AND METALLURGICAL CHARACTERISTICS OF ACTIVATED FLUX ASSISTED TIG WELDED MILD STEEL AND STAINLESS-STEEL JOINTS
Download PDF
Experimental And Numerical Investigation On Improving Cooling Performance Of Heat Sink.
Download PDF