Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2

April 2017
Vol-3, Issue-2
Paper ID: 4949
ISSN: 2395-4396
Downloads: 87
Download PDF

Abstract & Details

Research Area
Electronics and Comminication Engineering
Keywords
Langmuir probe Plasma Density Mars Electronics
Abstract
Langmuir probes have been installed on satellites and sounding rockets to observe the general characteristics of thermal plasma in the ionosphere for more than five decades. Because of its simplicity and convenience, the Langmuir probe is one of the most frequently installed scientific instruments on spacecraft. A conducting sensor called probe is fixed to the medium under monitoring to collect the current using the probe is measured to examine various plasma parameters in the MARS ionosphere. As the current is proportional to the ambient plasma density; typically a sweep bias voltage is supplied to the sensor and the current-voltage characteristics are used to study plasma parameters. The automatic gain switching system is used to gain the current in desired voltage range. It works on basic principle of the Langmuir Probe. In this paper, we describe the design, implementation and laboratory test results. The Langmuir Probe experiment consists of gold coated cylindrical sensor as the input stage of the system. The sweep voltage is applied to the sensor for generating current. By keeping the sensor in plasma, it collects the current and its current-voltage characteristics analysis suggests the plasma parameters like electron density, ion density, electron temperature etc. The low pass filter are used to remove unwanted frequency of signal later. This paper describes the primary scientific objectives of the Langmuir Probe experiment and the technical capabilities of the instrument.

Author Information

# Name Institute / Affiliation
1 Hardik Zala GTU PG School
2 S. A. Haider PRL
3 Sanjeev Mishra PRL

How to Cite

Use the following formats to cite this article in your research.

APA Style
Zala, Hardik, Haider, S. A., & Mishra, Sanjeev (2017). Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2. International Journal of Advance Research and Innovative Ideas In Education, 3(2), 5329-5335.
MLA Style
Zala, Hardik, et al. "Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2." International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, 2017, pp. 5329-5335.
IEEE Style
Hardik Zala, S. A. Haider, and Sanjeev Mishra, "Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2," International Journal of Advance Research and Innovative Ideas In Education, vol. 3, no. 2, pp. 5329-5335, 2017.
Vancouver Style
Zala Hardik, Haider S. A., Mishra Sanjeev. Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2. International Journal of Advance Research and Innovative Ideas In Education. 2017;3(2):5329-5335.
Harvard Style
Zala, Hardik, Haider, S. A., & Mishra, Sanjeev (2017) 'Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2', International Journal of Advance Research and Innovative Ideas In Education, 3(2), pp. 5329-5335.
Chicago Style
Zala, Hardik, S. A. Haider, and Sanjeev Mishra. "Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5329-5335.
Turabian Style
Zala, Hardik, S. A. Haider, and Sanjeev Mishra. "Electronics for Langmuir Probe Measuring Plasma Density in the Ionosphere of Mars : MOM - 2." International Journal of Advance Research and Innovative Ideas In Education 3, no. 2 (2017): 5329-5335.

Export Citation

Related Research

AI Powered Autonomous Defence Surveillance Vehicle
SIDDARTH R et al. 2026 Artificial Intelligence, Robotics, Embedded Systems and Autonomous Surveillance
Download PDF
SMART WEARABLE SAFETY PENDANT
Ananya M et al. 2026 Electronics and Communication Engineering, Internet of Things (IoT), Embedded Systems
Download PDF
CARTRAC: A LIGHTWEIGHT IOT-BASED SYSTEM FOR POST-CRASH ACCOUNTABILITY IN HIT-AND-RUN INCIDENTS
prof.Divya k et al. 2026 “Internet of Things (IoT)-Based Intelligent Transportation Systems, with a focus on real-time accident detection, hit-and-run accountability, V2X communication, and smart traffic management.”
Download PDF
Intelligent IoT Healthcare Assistant for Alzheimer's Disease with Fall Detection Airbag
Farzana parveen BA et al. 2026 Internet of Things (IoT) and Artificial Intelligence in Healthcare
Download PDF
MULTIMODAL RASPBERRY PI ROBOT WITH SPEECH, TOUCH, QR CODE AND OBSTACLE DETECTION
Prof Syed Husna et al. 2026 Multimodal Human–Robot Interaction and Autonomous Navigation Using Raspberry Pi
Download PDF
SMART STROKE CARE SYSTEM: INTEGRATING REHABILITATION, HEALTH MONITORING, AND ASSISTIVE AUTOMATION USING AI AND IOT
Prof. Roopa S et al. 2026 Biomedical Engineering and Smart Healthcare, using IoT and embedded systems.
Download PDF